2. System requirements
======================

 - Processor:  Pentium 133 MHz
 - Operating System: Windows NT4.0 SP6, Windows 2000,
    Windows XP or Windows Vista
 - Display:   1024x768 256 colors
 - System Memory (RAM): 64 Mbytes
 - Hard Disk Space: 80 Mbytes

 
3. Installation
===============

 1. Run the SETUP.EXE from the root directory of this CD.
 2. Follow the instructions given by the Installation
    Wizard.

4. Getting Help
===============

 - DriveWindow Light contains online help which can started
   by pressing 'F1' key or from the 'Help' Menu. Online
   Help requires MS InternetExplorer 3.0 or later installed
   in the computer.
 - User's Guide can be found in PDF-format in the
   DriveWindow Light Installation directory.

5. Known Issues
===============

 - Making the monitoring window bigger changes the maximum
   value of the y-axis.
 - Large Horse Power ACH400 drives can not be switched from
   reverse to forward without stopping the drive first.
 - In offline mode formerly saved monitoring data cannot be
   opened if no Parameter Browser is open.
 - ACS600 software versions 5.x and higher are supported
 - Some early versions of ACS550 don't have proper identification
   data. Online connection to these drives can be established
   using the Force Online -feature.
 - While installing DriveWindow Light on Win 2000, you may encounter
   an error "Error 1607: Unable to install InstallShield Scripting
   runtime." In this case open windows explorer and right under
   desktop there is My Documents folder. Right click on the folder
   and select Properties. If the Target location field is empty or
   you don't have access to the folder specified there, fill in a
   folder that you have access on. Try installation again.
 - ACx550 SW versions prior to 202c give an illegal value error with
   parameter 1602 while restoring or downloading parameters. This is
   because the passcode in parameter 1603 is not set in these cases.
 - Parameter compare does not work between different languages
 - Drive Statuspanel units are taken from corresponding .ini files.
   If e.g. ACS550 needs to show Upm (instead of rpm), open ACS550.ini
   file (under .Program FilesDriveWareDriveWindow Light 2).
   Change the key "Unit" under section [Speed] to value "Upm".
 - Editing of binary parameters is not possible in ACS800 drives
 - ACx550 and ACS350 files (*.dwp and *.dwm) made with
   DriveWindow Light 2.4 or newer are in unicode format. If they are
   to be used with older DriveWindow Light versions they must be
   converted to ASCII (with Notepad for example).
 - With drives using SAP protocol, the monitor data may be lost in
   some cases if the monitor settings are adjusted while the
   monitoring is on.
 - There may be compatibility problems with early sw versions of
   ACS350 drives including FlashDrop feature support.